Activity

Double Glazing Window Repairs

If you have your double-glazed window repairs carried out will keep them working well and save you money on heating costs. Professionals use the best tools and know precisely how to accomplish it.

They can also advise you on the latest energy-saving technology. A lot of new double-glazed windows have a warranty of 10 or 20 years, however certain windows offer lifetime guarantees.

Broken Panes

Cracks in double glazing aren’t just ugly; they’re also an obstacle to cold or heat getting into or out of your home. The good news is that a majority of damaged panes can be repaired without having to replace the entire window. To stop the crack from spreading, you can tape the area with masking or packing tape. Spread the tape over the glass edges on both sides. It’s also recommended to cover the crack with plastic, like a tarp or garbage bag, to keep the rain, bugs and animals out.

Then, remove the glass from its frame using an utility knife and a pair gloves. It’s better to take off the glass in one piece, rather than to break it into tiny pieces. It’s also important to be cautious, as any shattered pieces may fall and break more. It’s important to recycle old glass in a proper manner.

Once the old window is removed, you’ll need determine the opening for a new window. Take your measurements carefully and keep in mind that wood expands and contracts over time. To ensure that the new window will fit snugly it is best to subtract between 1/16 and 1/8 inches from each side of the measurement. Purchase enough glaziers’ points or clips for every 6 inches around the perimeter of the pane.

A professional will drill holes into the window, and then close the gaps using the use of a liquid sealant. This creates an impermeable barrier that will keep your home warm and dry. The process can take from one to three days, and it’s important to allow the sealant to completely dry before moving on.

While some double-pane windows may be repaired using this method, it’s generally recommended that you replace the window when you’re experiencing condensation, draughts or other problems that can’t be solved by drilling or taping. It’s also not a good idea for a novice DIYer to try the task on their own, as specialized tools are needed to complete the repair properly.

Condensation

Condensation can be a problem when the temperature or humidity of a space changes. It forms water droplets on cold surfaces. It can get trapped between double glazing in the event that the seal fails. It’s not usually a major issue, and you could perform a few things prior to calling in window repair experts.

Another alternative is to use a hairdryer with low heat (and at a safe distance) to remove any stagnant moisture that’s accumulated in between your windows. This is a temporary fix that does not stop condensation from recurring unless the source of the issue is identified. The best way to solve the issue permanently is to make sure that your home is equipped with adequate ventilation and that humidity levels are in balance. This will save you money on energy bills as well as decrease the risk of mould and damp developing around your windows.

Another way to tackle condensation is to employ a defogger. A small hole is drilled in the double glazing and then a cleaner solution sprays into it. This removes moisture from the air. This is a temporary solution and doesn’t guarantee to eliminate condensation in the long-term however it could be a reasonable option until you can get your window professionally repaired.

Condensation visible is an important indicator that the sealant between the double pane windows has failed. If you notice condensation, it’s essential to call your double glazing provider as soon as possible and get any issues addressed in writing. It will be easier to claim your warranty if it becomes necessary later.

It is also possible to try lubricating the handles, hinges or mechanisms on your double-glazing to see whether this can help. It is also possible to use a dry, clean cloth to wipe off any haze that may be present, but remember that this won’t fix the underlying issue which is the lack of a dry and clean space between your windows. If you are unable to resolve the issue, it could be necessary to replace your window.

Draughts

Nothing is worse than a cold draft coming through your double glazing. It can make your entire home feel draughty even if the rest of your house is warm. Luckily, most draughts are easy to fix and could save you lots of money on your energy bills.

A draught is typically caused by gaps around doors and windows. Poor fitting loose plaster or rotting timber, even paintwork that is loose can cause draughts. Draught-proofing is a cost-effective method of reducing your energy costs. It keeps warm air from leaving your home during winter, and cold, cold air from entering your home in summer.

The installation of draught-proofing strip is the best way to stop drafts. They are available in a variety of materials like brush, foam or rubber strips that can be positioned around the bottom of the door or along the top or sides of the frame. There is also draught proofing for sash and casement windows. There are brushes that can be fitted to sliding sash windows as well as casement windows with rubber strips which can be glued or screwed into the place.

You can also use a draught-excluder in the gap between your floorboards. This will stop warm air rising and causing a draft. However, this method is only really effective if the floorboards aren’t carpeted. You can also add a vent cover for an open fire, if it isn’t in use and seal the gaps around sinks, around extractor fan vents as well as in chimneys and any other vents that aren’t used in your home.

Misted double glazing is a common problem, which is easily fixable by creating a new seal. repairing double glazing glazing firms will offer drilling holes in the glass unit and put in a plug. However it is only an interim solution. It is recommended to contact the company who installed and sold your double glazing to ask them to fix the glass unit. It might cost more however replacing the entire window will be less costly.

Mist

Mist is caused by condensation between the panes of a double-glazed window. The sealant that holds the glass together stops moisture from escaping. However, it could be damaged or worn away by an accidental impact or weathering. It is important to repair the damage as soon as you can as it can cause homeowners a variety of problems, including damp and mould and the cost of energy.

There is an easy and quick fix to the issue without having to replace the entire window. Simply drilling a few holes through the window unit will allow you to tuck in a desiccant bag, which will absorb any condensation that may occur between the glass panes. This will eliminate the issue and leave your windows sparkling clean.

If you don’t want take on the task of drilling holes in your double-glazed units, there are companies that will complete the task for you. This method is expensive and requires some experience and skill to be successful.

In certain situations, it could be necessary for the window to be replaced if it has suffered other serious damage, such as extensive rot, or severe cracks. This is especially the case in the event that you plan to upgrade to A-rated Low E glass for better insulation and lower heating expenses.

It is recommended to contact the company that installed your double glazing. They will be able to fix the misting issue or offer you a discount on a replacement unit based on whether it’s still under warranty. For more general maintenance and maintenance of your double-glazed windows, it’s worth regular inspection of the mechanism, hinges, handles, and any areas where the windows or doors pass through the frame for signs of wear and tear. Cleaning your double glazing will also help to minimise the possibility of issues with condensation and moisture in between the panes. If you’re having trouble opening or closing your windows, make sure you grease the hinges and mechanisms by applying some grease or oil.