Activity

Double Glazed Windows Repairs

It could be that the double-glazed windows you have are difficult to open or there is fog between the panes. If this is the case, it would be worthwhile to arrange for them to be fixed.

This is a cheaper option than replacing the windows. This kind of repair requires very specific tools which is why it’s advisable to leave this to a professional.

Seals that have been damaged

The seals on windows can wear down over time and allow argon gas or krypton to escape from between the panes of double- or triple-paned windows. A broken seal allows outside air to pass through and the argon gas used to insulate your home to escape. Both of these are detrimental to energy efficiency.

Window seals can be damaged due to extremes in temperature, humidity and pressure. These changes cause your window glass to expand and contract, which places an enormous amount of pressure on seals over time. This is also a possibility when you have pets or children who accidentally smash into your windows.

If the window seal is broken, it is recommended to have the issue looked into by a specialist as soon as you can. If you delay too long and the argon or krypton gas may disappear completely, and this will significantly reduce the insulation properties of your window.

Fog that forms between the window panes is a typical sign of a failing seal. While it’s possible to fix this yourself by defogging the window, the best option is to get a specialist to inspect and seal your window.

When your windows are resealed the technician will take off the old seal, wash the panes and replace the new seal. This will involve disassembling the sash in case it is necessary and then reassembling it, and replacing the IGU (insulated glass unit) in the event that it is required. Then, they will re-insert argon (or krypton) into the void between the panes. They will also seal the IGU to create an airtight seal. This isn’t one you can do yourself However, there are certain kits that claim to aid homeowners with this. The reviews for these products aren’t always positive however, and we would recommend leaving this work to the experts.

Condensation

Condensation is a potential issue with double glazing. This is particularly true in older properties. It occurs when the air inside a home has higher dewpoints and is warmer than the glass, causing condensation to occur. This is likely to happen at late at night or early in the morning, since the temperatures are at their the lowest.

Condensation in double-glazed windows can be easily fixed and it is not required to replace the entire window or doors. The spacer bar found between the two panes of glass in most double glazing is filled with desiccant, which is extremely absorbent and sucks up any moisture that gets into the ‘air gap. If this spacer bar becomes saturated with moisture, it may leak into the window frame where condensation develops.

It is also important to remember that most double-glazed windows are still under guarantee and should be reported to the company that installed the windows. They will investigate the problem and replace any seals or units that are defective. Don’t attempt to alter the units, as this may cause damage to your warranty.

Checkatrade offers a variety of reliable tradespeople to choose from for double glazing repairs. Our tradespeople have been checked and vetted to ensure you get a professional service for a reasonable price. If you’re having difficulty opening your double-glazed doors or windows it is possible to fix the mechanism by lubricating hinges or handles. repair double glazing could also try wiping the frames with a damp cloth to see if that aids. Extreme weather conditions can make them to expand or shrink and make them difficult to open.

Draughts

The gap between the frame and wall allows for draughts to enter your home, which can be cold and increase your energy costs. Draught proofing can help by sealing the gaps and improving insulation. It is worth getting estimates from several firms for this work as it may vary, but any reputable company should be able to guarantee their work.

Misted double glazing can be difficult to see through, but it usually means there’s a problem with the seal. A window repair specialist can resolve this issue by using a powerful defogger.

If you see cold draughts forming around your windows It could be a sign that the sealed units aren’t efficient. This can lead to more expensive heating costs. Window repair services can replace the double-glazed units, which will eliminate draughts and improve insulation.

If you have difficulty opening or closing windows, it could be because the hinges or mechanisms are stiff and need to be oiled. This is a simple fix, and you can consult the company who installed your double glazing to learn more about the warranty they offer. will cover.

Over time, uPVC frames may get discolored. This is usually caused by sunlight, cleaning solutions or the weather however if you notice a lot of dark streaks or areas that aren’t clean, it could be time to get frames replaced. Some companies offer replacement services, but others will replace the whole frame and handle or locking mechanism. It is always best to contact your original window vendor. They’ll be able to give you suggestions on the most cost-effective option for your property. They might even be able to match your existing frames, meaning you don’t have to change everything.

Smudging

This is the initial sign that double glazing is experiencing a problem, and it’s easy to repair. The condensation that is created inside the window is trapped between the two panes. It appears as smudges or droplets of water on the outside of the windows. If this is not addressed, it can lead to mould or damage to the material of your sills and frames and sills, not to mention that the inhalation of mold spores for long periods of time can lead to health problems.

The top double glazing firms can identify the problem and provide an affordable solution. They’ll be able replace the gaskets for windows that hold air between the two glass units and drafts out, giving you a more comfortable home while reducing your energy bills.

If you’re looking to do the repair yourself the best starting point is using a rag along with dish soap to wash the surface of your window. Then, you’ll need mix two-part epoxy on cardboard or a disposable plate and then use it to repair any cracks. This is a temporary fix and it’s crucial to select the appropriate product for your requirements.

If you are thinking of replacing your double-glazed windows, look for a company that provides the guarantee of their products. You’ll have peace of mind knowing that you are working with a licensed and reputable business that will provide you with quality products and services. Also, check out customer reviews before making an important decision. This will help you determine if the company is right for your requirements.

Mist

Condensation on the exterior of your double glazed windows is nothing to worry about, since it’s an indication that your windows are functioning properly keeping damp and moisture out of your home. However, the presence of mist inside your windows is a much more serious problem and could indicate that one or more seals have broken.

The gap between the two panes of glass in a double glazed window must be sealed with argon gas to make the whole unit air tight and water resistant. If the glass appears to be misting, it could be because the argon gas has been compromised, or that a seal was damaged. This could be an indication of a poor installation, since the window may have been damaged in the process, or the sealant may have worn away over time.

Many companies claim they can repair misted double-glazed windows by drilling small holes into the glass, and pumping chemicals into these holes to absorb water vapour that is trapped inside. While this may be a viable solution for the majority of people however, it’s important to realize that there are limitations to what can be fixed.

Sometimes, a replacement is the best option. This is particularly true when there are major damages. If the window unit has been damaged or is no longer functional due to rot, it may require replacement. A professional consultation is recommended in these cases to determine the best option.